QX-5 RED / QX-5 BLUE | Ultra-Fast-Exposing SBQ-Photopolymer Emulsions
QX-5 Red and QX-5 Blue are universal, ready-to-use, ultra-fast-exposing SBQ-photopolymer direct emulsions. Their high viscosity (5000 centipose) provides good coating control. Their high solids content (41%) results in better mesh bridging on coarse mesh, and fast drying. Their high contrast colors afford easy stencil inspection. QX-5 Red and QX-5 Blue are resistant to plastisol inks, most washup solvents, and some water-based inks, making them easy to reclaim in automatic stencil removal equipment or by hand. QX-5 stencils are extremely durable and will not become tacky under high humidity conditions. Both are formulated to reduce stencil-making time (coating, drying, and exposure) in shops with high stencil throughput. Their fast exposure speed will also be of interest to low-volume printers with weak light sources.
FEATURES
BENEFITS
Fast exposing
Fast stencil throughput for high volume shops
Dependable polymerization assures durability and ink resistance
High (41%) solids content
Dries quickly
Better mesh bridging on coarse mesh
Lower Rz value yields sharper printed edges
High viscosity (5000 CPS)
Easier to control during coating
Solvent Resistant
Resists a wide range of solvent-based inks
Moisture Resistant
Moisture ResistantWill not become tacky under high humidity conditions
High-contrast color
Easy stencil inspection, even on colored mesh
Shelf life
Unopened: 1 year at 70º F. (21º C.)
FORMATS
QX-5 Red and QX Blue are available in 28 ounce, 1 U.S. gallon, 5 U.S. gallon, and 50 U.S. gallon units (0.83, 3.78, ≈ 18.9, and ≈ 190 liters, respectively).
Red | Blue
41%
5,000 cps
SBQ; Non-Diazo Dual Cure
COLOR : Red | Blue
SOLIDS : 41%
VISCOSITY : 5,000 cps
SENSITIZER : SBQ; Non-Diazo Dual Cure